Garnet sand 30-60# for sand blasting on workpiece surface
Products Description:
Garnet abrasive for water jet cutting media is a naturally inert mineral which have characteristics sharp, angular, and the hardness 7.5 – 8.0 Mohs scale. The crystal physical properties make it a superior abrasive, suit for water jet cutting machine.
Garnet sand was come from high quality almandine rock mining. In order to provide “efficient, economic and environmental” garnet abrasive The most important step is washing.The good washing steps can make the sand clean. We have 6 steps washing, so it is cleaner.
Garnet Chemical Analysis:
| Colour | Dark red | Hardness | 7.5-8.0 Mohs |
| Fracture | sharp | Specific Weight | 3.9 g/cm3 |
| SiO2 | 34-40% | Melting point | 1300°C |
| Fe2O3 | 25-31% | Al2O3 | 17-21% |
| Ca O | 5.0-10.0% | Mn O | 0-1.0% |
| Mg O | 5-6% | Chloride | 10-15ppm (25ppm max) |
| Application & Suggest Size | ||||
| Sand Blasting | 24# (10-30mesh) | 30# (24-40mesh) | 36# (30-50mesh) | 60# (40-60mesh) |
| Water jet Cutting | 60# (30-60mesh) | 80# (50-80mesh) | 100# (70-100mesh) | 120# (100-120mesh) |
| Water Filtration | 0.2-0.6mm | 0.6-1.2mm | 1.2-2.4mm | 2.4-4.8mm |
| Polishing Garnet Abasive | 150-320 mesh | |||
| Others | 8-320mesh (3.5mm-0.025mm) | |||
Why choose US?
Garnet sand is kind of cost-effective abrasive which would last a long time with the Mohs harness 7.5-8.0
Garnet sand is environmentally friendly abrasive
Garnet sand is low dusting material
Garnet sand is nontoxic abrasive
The usage:
- Free grinding and polishing.
- Resin abrasives.
- Coated abrasives.
- Sandblasting.
- Waterjet cutting.
- Water filtration.
- Stone washing.
- Surface preparation